Specifications

Radio Operation
MICOM-H Owner’s Guide 23
Scan Mode
In Scan mode, the radio scans the programmed scan channels. Up to five scan groups
(A to E) can be created via the RSS, each containing up to 200 channels. When a
guard channel is selected, it is monitored after every other scanned channel.
To use scan mode:
1.
Press
MENU
to display the menu screen.
2.
Press
SCAN
(F3).
The last active group blinks (A).
3.
If you want to use the currently displayed scan group, press
ENTER
OR
Press the function key beneath the group you want to choose and press
ENTER
to
confirm your choice.
Note
If there are no defined groups, the message “NO GROUPS”
appears in the display.
Notes
1.
In scan mode, one of the five groups is always selected, and
the other four groups are displayed over the function keys.
2.
If the selected group is not programmed, the message
“GRP X EMPTY” appears in the display (X being the
selected group).
MENU
CHAN FREQ SCAN BIT
SCAN
GROUP A
BCDE