Specifications

Radio Operation
MICOM-H Owner’s Guide 22
Storing Frequencies
You can store specific frequencies and frequency parameters in channels which you
have programmed (see “Programming Channels” (page 32)).
To store a frequency in a channel:
1.
If you are not in Frequency mode, press
MENU
to display
the Menu screen.
2.
Press
FREQ
(F2).
The last active frequency blinks, and the frequency type
is displayed in the top line.
3.
If you wish to use the displayed frequency and frequency type, press
ENTER
. If
the Frequency type is Duplex, press
ENTER
twice to accept both transmission
and reception frequencies.
OR
Change the frequency type and the frequency as required (see “To change the
current frequency/frequencies” (page 19)).
4.
If necessary, set other parameters, using the
MORE
key and pressing the
required function keys (see “Frequency Mode Options” (page 21)).
5.
Press
MORE
twice, and press
STOR
(F2).
6.
Select a channel using the scanning wheel, keypad or
UP
/
DOWN
keys until you reach the required channel, or
use the keypad to enter the channel number.
7.
When the desired channel is displayed, press
ENTER
to
confirm your choice.
The frequency parameters are stored in the selected
channel.
MENU
CHAN FREQ SCAN BIT
SMPX
F 10,000.00
SMPX DPLX RXO TXO
FREQ
R 15,000.00
RCLV STOR
FREQ
STORE CH 5
BACK CLR
FREQ
STORING