Specifications

Radio Operation
MICOM-H Owner’s Guide 21
Frequency Mode
Options
In Frequency mode, you can operate functions and options to eliminate noise and
assist reception and/or transmission. The icon display reflects the options selected.
T/R
(F1) sets the transmit and receive frequencies and
frequency type.
BAND
(F2) toggles between upper side band (USB) and
lower side band (LSB).
SQ
(F3) toggles the squelch
(on/off).
DSP
(F4) accesses the Digital Signal Processing menu,
which includes:
•
CLAR
(F1) clarifier
(off/less/more)
*
not available for Tx Only channels
•
NF
(F2) notch filter
(off/less/more)
*
not available for CW or Tx Only channels
•
CLIP
(F3) clipper
(on/off)
•
NB
(F4) noise blanker
(on/off)
*
optional, to be purchased separately
•
ATTN
(MORE, F2) attenuator
(on/off).
PWR
(MORE, F1) power level selection
(low, med, high or max).
MODE
(MORE, F2) operation mode selection
(SSB, AME or PLT).
AGC
(MORE, F3) automatic gain control
(fast/slow/off).
BW (MORE, F4) bandwidth selection
(2.1 K, 2.7 K, 3.0 K, 3.3 K, LSM or CW;
CW includes bandwidths 0.25 K, 0.5 K and 0.8 K,
see “CW Operation” (page 44)).
RCLV
(MORE, MORE, F1) displays the reception level
when F1 is pressed.
*If the reception is programmed as
OFF
, this option does
not appear,
see “Receive Level” (page 44).
STOR
(MORE, MORE, F2) stores the frequency
parameters in the selected channel.
FREQ
R 15,000.00
T/R BAND SQ DSP
FREQ
BAND LSB
T/R BAND SQ DSP
FREQ
SQUELCH ON
TXM BAND SQ DSP
FREQ
DSP PARAM
CLAR NF CLIP NB
FREQ
CLAR +100
OFF
FREQ
NF –– ––
OFF
FREQ
CLIP
–
ON
CLAR NF CLIP NB
FREQ
NB
–
ON
CLAR NF CLIP NB
FREQ
ATTEN – OFF
ATTN
FREQ
POWER HIGH
LOW MED HIGH MAX
FREQ
MODE PILOT
SSB AME PLT
FREQ
AGC FAST
PWR MODE AGC BW
FREQ
BW 3.0
2.1 2.7 3.0 3.3
FREQ
F 10,000.00
RCLV STOR
FREQ
R 15,000
RCLV STOR