Specifications

Getting Started
MICOM-H Owner’s Guide 10
Basic Radio
Operations
Function Keys
The function keys (F1, F2, F3, F4) are used to select a wide variety of options, which
depend on the current radio mode. An acronym or abbreviation denoting the current
function is displayed in the bottom line of the display, above the relevant key.
If a certain function key is not available (for instance if the radio is locked), the space
above the key will remain blank, and the key will not function.
Predetermined
Numeric Value Mode
When there is a parameter for which there are
predetermined values, F1 enters the lowest possible value
(minimum or OFF); F4 enters the highest possible value and
F2 and F3 increment or decrement the value.

You can not use the keypad to enter the value for this type of parameter.
Toggle Mode
When the function being set is a yes/no toggle, one function
key will be
YES
and another
NO
.
Up/Down Scroll Keys
The
UP
/
DOWN
scroll keys are used to scroll between values that are already
programmed into the radio.
For example, in Channel mode you can view the programmed channels:
A single keypress on the
UP
/
DOWN
scroll keys displays the next or previous channel
respectively; pressing either key continuously browses among the channels, four
channels per second.
In Frequency mode the
UP
/
DOWN
scroll keys are used to change the frequency.
When programming, you can use the
UP
/
DOWN
scroll keys to scroll between the
different programmable parameters.
Scanning Wheel
The scanning wheel is used to scan the available frequencies. It can also be used
instead of the
UP
/
DOWN
scroll keys to scroll between values that are already
programmed into the radio.
CHAN
PARAMETERS
GET STOR ERAS PWR
F1 F2 F3 F4
PROG
ADT - 3 SEC
1 10
PROG
TUNER - NO
YES NO