Specifications

Getting Started
MICOM-H Owner’s Guide 9
The Rear Panel
The rear panel of the MICOM-H includes the following connectors:
Beeps
The MICOM-H can be set to beep when the keys on the front panel are pressed,
indicating that the key press has been registered. A different beep can be heard when
the PTT button of the remote radio is released, indicating that the other party to the
call has completed transmission and that you can now transmit.
You can enable or disable these beeps, and can set their volume (PTBP and KBBP
functions in Radio Programming).
Accessory Connector (J3)
25-pin connector for external
accessories such as PC’s, modems,
Morse key devices, etc.
Antenna
Socket
DC Connector (J4)
Power input connector.
Ground Screw
Used to ground the radio
to the vehicle in a mobile
installation.