Specifications

Technical Specifications
MICOM-H Owner’s Guide ix
Transmitter
The MICOM-H transmits signals in accordance witht the following specifications:
Output power
125W P.E.P. and average
Reduced power levels
25W, 62W, 100W (RSS programmable)
Audio bandwidth ripple
3 dB
Intermodulation
-31 dB/P.E.P (-35 dB/P.E.P Typical
*
)
*. Values noted as “Typical” are valid over 90% or more of the frequency
range.
Harmonic emissions
-64 dB/P.E.P (-70 dB/P.E.P Typical
*
)
Spurious emissions
-64 dB/P.E.P (-70 dB/P.E.P Typical
*
)
Carrier suppression
-50 dB/P.E.P
Undesired sideband
suppression
-55 dB/P.E.P
Audio distortion
2.5%
1/2 power microphone
sensitivity
25 to 125 mV (RMS)/600 Ohms
Hum & ripple
-50 dB
Inband noise
-60 dB (30 Hz BW)
Tx/Rx switching time
10 msec