User Manual

PC
1. Please note that there are two connectors at the very end of the wire of the headset, the 3.5mm
plug is for microphone and headset and the USB plug for lights.
2. Insert the 3.5mm interface directly into your PC.
3. Connect the 1-to-2 3.5mm jack splitter cable (Included) with the 3.5mm jack of the headset
and plug it into PC if you want to use headphone and microphone at the same time.
4. Make sure to insert the right jack (pink for microphone).
5. Plug the USB jack into USB port if you want to use LED light.
PC
Product Parameters
Speaker size 50mm
Microphone
Impedance
2.2kohm
32Ohm+15% Directionality omni-directional
112+/-3dB Cable Length 2.1M +/-0.15
Impedance
Sensitivity
Frequency Range
15 Hz-20KHz Led Working Voltage DC 5V +/- 5%
Microphone
6.0x 2.7mm Working Current Below 100mA
Microphone Sensitivity -38+/-3dB Headset Jack USB+3.5mm 4 Pin
1. The headset is applicable to 3.5MM quadrupole single plug audio device such as laptop, tablet
PC, mobile phone, etc. With the bisected adapter cable of 3.5mm interface, the 3.5mm dual plug
of the computer can be used.
2. Generally ,the cable end or microphone end is designed on the left-side, so wear the cable end
or microphone end on the left ear when wearing headset.
3. When using the headset on computer, please make sure the headset microphone switch is turned
on; then make sure the computer microphone switch is turned on. Please find the"speaker" icon
in the computer taskbar, and double-lick to enter the volume control for settings. And enter into
the voice" for settings on the "Control Panel”.
4. Please make sure the headset volume adjustment button is at the minimum volume, and can be
adjusted to the appropriate volume.
5. Please use the headset to enjoy the game.
6. Support the 32-bit and 64-bit Win7/ Win8 / Win8.1 / Win10/XP.
Range of Application and Operating Instructions
Frequently Asked Questions
a) The headset plug is quadrupolar single plug type. The international (CTIA) standard 3.5 mm
interface: pin connection is left channel - right channel - ground wire - microphone, which is the
most popular connection in the market and the largest application. If the international standard
headset is connected to a non-international standard interface. there will arise the phenomenon
of background sound only. If the audio device is non-international standard, the adapter cable
is needed.
1. When playing music by headset , there is accompaniment but no singing?
a) When using the headset, please make sure that the tone control microphone switch of headset
is turned on, and make sure that the microphone works normally.
b) The headset plug is quadrupolar, single plug type with the function of audio /voice combination,
and is applicable to single-hole audio device. Please make sure that if your device fits the audio/
voice combination interface;
c) The headset plug is quadrupolar, single plug type. while your device may be of tripolar interface;
d) With the bisected adapter cable of 3.5mm interface , you can use the 3.5mm dual plug (headphone
and microphone jack) interface of the computer. You can enjoy beautiful music and voice chatting
at the same time.
2. When playing music with headset, there is sound but the voice chatting can't work?
a) Please check if the plug is well inserted into the interface device.
b) The headset plug is quadrupolar, single plug type, while your device may be of tripolar interface.
3. When playing music with the headset, there arises the phenomenon of noise , small volume,
unclear sound, or one side with sound and the other side without sound?