Product Info

5
fitment of the SOLAR receiver
Remove the backing from the adhesive pad at the rear of the receiver taking care not to touch the adhesive
surface.
Normal Operation Mode
The power icon will flash once every 30 seconds when in journey mode.
Low power
When the solar receiver has less than 15% power the power icon will flash red every 10 seconds.
To charge the solar receiver plug the charger into the side of the receiver and connect to a power source.
The power icon will stay permanently white when fully charged.
Stationary Sleep Mode
When the vehicle is stationary for more than 15 minutes the receiver will go into Stationary Sleep Mode.
No Lights will be on at all in this mode.
Find the ideal position for the receiver on the windscreen (ideally towards the top of the windscreen)
ensuring that it is outside the wiper sweep. Ensure the solar panel is not blocked by the black border that
exists around many windscreens.
The area of the windscreen where the receiver is to be fitted should be clean and free from dust or grease.
Place the receiver in the correct position and push firmly against the widscreen, holding and pushing for up
to 10 seconds.