User manual

Fig. 231 – Windows Vista – End of driver installation

• Click on

“Close”.

• Your ViaMichelin portable GPS device should then appear on the screen below telling you not to

remove the SD card from your ViaMichelin portable GPS device during installation:

Fig. 232 - PND connected to a PC

----------

• If your ViaMichelin portable GPS device is the first device to use the Microsoft Windows Mobile 6, you

must also accept the licence agreement for this software.

Fig. 233 – Windows Vista - Mobile 6 device licence agreement

• Click on

“Accept”.

----------

If the PC does not detect your ViaMichelin portable GPS device, we suggest you plug in your USB cable on

another USB port and check that there are no other peripherals plugged into the USB port of the PC (Webcam,

printer, etc.) that could disturb the connection with your ViaMichelin portable GPS device.

• When your ViaMichelin portable GPS device is connected to your PC, click on “Next >”.

148

Fig. 234 – Windows Vista - Synchronisation

Synchronisation with the GPS portable device takes a few minutes.

Fig. 235 – Windows Vista - Product Activation Code

• Select the code identifying the product – generated specifically for your ViaMichelin portable GPS device

(different therefore from the example above) – with the mouse and copy it into the PC clipboard (press

on CTRL and C simultaneously).

• Click on the

“Access the ViaMichelin web site” bar.

----------

Fig. 236 – Windows Vista – Anti-phishing filter

• If you are using your Internet browser for the first time, the Windows anti-phishing filter is not yet

configured. You must select Activate the automatic Anti-phishing filter (recommended)” and click

on “OK”.

----------