User manual

89
the sides of your ViaMichelin Navigation X-980T portable GPS device temporarily.
The buttons will light up for three seconds when pressed.
Activation
headset/TMC
(only available with the ViaMichelin Navigation X-980T)
- Select TMC socket to receive the RDS / TMC traffic information via the wire
antenna connected to the jack plug of your ViaMichelin Navigation X-980T to
obtain sounds from the speakers contained in the mounting system of your PND.
- Select Headset connector to obtain the voice navigation instructions with
headphones plugged into the jack plug located underneath your ViaMichelin
Navigation X-980T. This function turns off the speaker contained in the mounting
system of your PND.
90
15.2.1. SOUND ADJUSTMENT
Fig. 104 – Sound adjustment
Volume To adjust the volume of message and acoustic alerts.
>SOUND ADJUSTMENT / VOLUME
Mono/Stereo To select/deselect sound in stereo mode when the vehicle is equipped with an
integrated connection.
15.2.2. SOUND ADJUSTMENT/VOLUME
Fig. 105 – Sound adjustment
• Click on the left or right arrows to select the configuration of your choice in the categories: “Sound”
and “Select sound”.
• Use the “Sound” parameters to select:
- Activated To activate all sounds.
- According to speed
- Specific to car radio To use the speakers in the car radio when the ViaMichelin
portable GPS device is linked to this circuit.
- OFF To deactivate all sounds.
• Use the “Select sound” parameters to select:
- General To set the maximum volume of sound messages
-
Instructions To adjust the voice instructions during navigation.
- Safety alarms To adjust the volume for safety alarms.