User's Manual

Michelin eTire™ Drive-By-Reader Model # DBRPL1.0 Page
2 of 3
Compliance
This equipment has been tested and found to be in compliance with the limits for
FCC Part 15, Class A digital device. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment.
Installation
Site survey and installation design will be provided by Michelin, or their appointed
representatives.
User Guide
Training in the use of the DBR will be provided by Michelin or their appointed
representatives. The DBR is for use solely in conjunction with the Michelin e
Tire
™
sensors installed in tires.
IMPORTANT
NOTE: This system must be installed by experienced professional installers who
are familiar with radio frequency (RF) equipment operation as well as local
building and safety codes. Failure to do so may void the Product Warranty, as
well as expose the end user to legal and/or
financial liabilities. The device and its
antenna must not be co-located or operating in conjunction with any other
antenna or transmitter. Any changes or modifications of equipment not expressly
approved by the manufacturer could void the user's authority to operate the
equipment and the company's warranty
.
Michelin eTire
™
Model: DBRPL1.0
FCC ID: FI5-DBRPL10 IC: 5056A-DBRPL10
This device complies with part 15 of the FCC Rules and with
RSS-210 of Industry Canada. Operation is subject to the
following 2 conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operations
.