User Manual

7
Before the First Use
Before the first use, please take out all accessories from the package and read this
manual carefully. Please pay particular attention to operational instructions and
cautions to avoid any injury or property damage. Please wash the inside of the lid
and the inner pot with warm soapy water, rinse and dry thoroughly. Wipe the
outer housing with a clean damp cloth. Never immerse the cooker housing in
water or any other liquid. The inner pot, sealing ring and steam release handle and
all accessories are dishwasher safe. But never clean the lid and housing in a
dishwasher.
Install the Condensation Collector
To install the condensation
collector, slide it into the slot
on the cooker housing.
Follow the reverse order to
remove it for cleaning.
Remove and Install the Anti-Block Shield
The anti-block shield can
be removed by pushing it
on the side to lift it up. To
install the anti-block shield,
position it in place and
press it down. The
anti-block shield can be
installed on either
direction lengthwise.
Remove and Install the Sealing Ring
The sealing ring can be removed by
pulling upwards from the sealing
ring rack in sections. To re-install
the sealing ring, pressing it down
into the rack section by section.
The sealing ring can be installed on
either side facing up.
Please note the following:

Prior to each use, inspect to make sure the sealing ring is well seated in