User Manual

5
Electric Power
If the electrical circuit is overloaded with other appliances, your new Unit may not
operate properly. It should be operated on a dedicated electrical circuit.
Precautions
Before each use, please make sure to inspect the following:
1.The anti-block shield, float valve and exhaust valve are not blocked by food
debris.
2.The bottom surface of the inner pot and the heating plate are free of any foreign
objects.
3.The steam release handle is in the "Sealing" position for all pressure cooking.
After cooking, wait until the cooker cools down for a while and release the
pressure using the steam release handle. Use extreme caution when opening the
lid. Scald and serious burns can be caused by the steam inside the unit.
If all LED lights are flashing on the control panel, unplug the power cord
immediately and consult the “Troubleshooting” section.
Care must be taken with the sealing ring to avoid deformation. Failure to do so
may prevent the product from working properly.
Special Cord Set Instructions
Model 077754 has a 3-prong grounding plug. To reduce the risk of electric shock,
plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
A short power supply cord is provided to reduce the hazards resulting from
entanglement and tripping. An extension cord may be used if care is exercised in
its use. If an extension cord is used, use only a 3-wire extension cord that has a
3-prong grounding plug and a 3-slot receptacle that will accept the plug on the
appliance. The electrical rating of the cord must be at least 12 amps and 120 volts.
The extended cord must be arranged so that it will not drape over edge of table or
counter where it can be pulled by children or tripped over accidentally.