Instruction manual

22
TROUBLE SHOOTING GUIDE
5. THE MACHINE WILL NOT START
1. The operator must be properly seated in the driving position.
2. Confirm the brake pedal (1) is completely released.
3. Check that the connectors (2) are attached.
4. The switch should be ON (3).
5. Confirm the batteries are charged.
6. EXCESSIVE FOAM PRODUCTION
Check that a low foam detergent has been used. If required, add a small quantity of
antifoam liquid into the recovery tank.
Remember that more foam is generated when the floor is not very dirty. Use less
detergent if this is the case.
PLEASE REFER TO THE PARTS MANUAL FOR DETAILED
PARTS ILLUSTRATIONS, ELECTRICAL WIRING DIAGRAMS,
ALARM DESCRIPTIONS AND ADJUSTMENTS AND INSPEC-
TIONS.