Instruction manual

DAILY MAINTENANCE

4. DISASSEMBLY OF THE ROTATING BRUSHES

1. Connect the battery connector.

2. Turn the key to the ON position.

3. Lift the brush base with the brush lever.

4. Return the key to the OFF position. Do not attempt to attach the brushes with the

power on, injury to the hands may result!

4. Remove the cartridge from the filter and clean with water.

5. Reassemble.

3. CLEANING THE SOLUTION TANK AND FILTER

1. Open the water valve.

2. Unscrew the filter and empty the solution tank.

3. Clean the inside of the tank with clean water at a temperature not more than 50°C/

122

°F.

Use gloves to protect yourself from contact with dangerous solutions

5. Rotate each brush until it comes off from the brush plate seat. The figure shows

the rotating direction for the disassembly of the right brush, the left one has to

be rotated inversely.

1. Remove the hopper (6).

2. Empty it and clean with water. Wear gloves to protect your hands from danger-

ous chemicals.

3. Reassemble.

5. HOPPER CLEANING