Instruction manual

OPERATION

Note: The maximum gradient with a full load is 10% (5.7 degree incline).

Note: In reverse, a buzzer will sound and the rear light will flash (optional equipment) .

3. TRACTION

This machine is equipped with electronically controlled traction. There are three

forward and three reverse speeds. Forward or reverse movement are selected through

the manipulator (1). Pressing the drive pedal starts the machine’s movement and the

speed is adjusted through the knob (2).

Note: Remember to lift the squeegee through the manipulator (3) when in manual

mode, during reverse motion.

Note: Switch to manual mode (4) during transport.

4. BRAKES

The machine is equipped with an electrical braking system through the drive pedal.

Lifting your foot off the drive pedal is sufficient to brake during normal working

conditions.

The mechanical brake pedal (1) should be used in emergency situations or if the

standard breaking system does not function properly. To engage, push down then

back until coupled.