Instruction manual

15
DAILY MAINTENANCE
REPLACING THE SQUEEGEE BLADES
Check the squeegee blades for wear and if necessary, change them.
To replace the squeegee blades:
1. Remove the squeegee hose from its coupling.
2. Take off the pin from the stud bolt.
3. Remove the squeegee from its support.
4. Loosen the wing nuts (1) that lock the rubber blades and take them off.
5. Replace the blades.
6. To reassemble the squeegee, repeat the above operations inversely.
DISASSEMBLY OF THE BRUSH
To remove the brushes:
1. Lift the brush base with the pedal.
2. Make sure the brush switch (1) is OFF.
3. Rotate each brush until they come off the brush plate. The figure shows the
rotating direction for releasing the right brush. Rotate in the opposite direction to
release the left brush.
1
1