Instruction manual

5mm

MACHINE PREPARATION

9. ADJUSTING THE SQUEEGEE INCLINATION

During operation, the rear squeegee blade is most efficient when tilted back about

3/16 inch (5mm) along its whole length. To increase the blade bending in the central

part, tilt the squeegee body backward by turning the adjuster counter-clockwise.

Subsequently, turn the adjuster clockwise to increase the bending at the sides of the

squeegee blade.

10. INSTALLING THE SPLASH GUARD

The splash guard should be installed as shown in the picture.

11. BRUSH INSTALLATION

1. Lift the brush base with the foot pedal.

2. Place the brushes under the base. Line up the lugs with the holes in the brush plate.

Insert the brushes into the plate and turn each brush so the lugs are pushed toward

their retaining springs, until locked in place.

The picture shows the direction of rotation for the right brush. The left brush is

rotated in the opposite direction.