Specifications

OPERATION
12
Tennant 5400 (04--05)
OPERATING MACHINE
NOTE: If your machine is equipped with the FaST or
ES Option, refer to pages 13 and 14 for additional
operation procedures.
1. Release parking brake, if equipped (Figure 15).
FIG. 15
2. Adjust control console to a comfortable operating
height, 5 settings. To adjust height, pull control
console trigger and lift or lower console to desired
height, release trigger to lock position (Figure 16).
FIG. 16
3. T urn the key and solution switch to the ON
position.
4. To conventional scrub with a FaST model, make
sure the FaST system switch is in the off (O)
position (Figure 17).
FIG. 17
5. Lower squeegee assembly to floor using the
squeegee lift lever, vacuum motor will
automatically turn on (Figure 18).
FIG. 18
6. Press top half of brush pressure switch to lower
scrub head to floor (Figure 19).
FIG. 19
NOTE: The brushes and solution will start when
control grips are rotated.
7. T urn speed control knob to slowest setting
(Figure 20).
FIG. 20
Home
Find...
Go To..