Instruction Manual

2
ENGLISH
DATE MODELS
Do not change the date between
the hours of 10pm and 2am . This is
the time when the movement is in
position to carry out the automatic
date change, and any interference
may cause damage to the movement.
Date Setting
1. Pull the crown out to position 1.
2. Turn the crown either clockwise or counter-clockwise and set the date
for the previous day.
The direction that moves the date varies on different
watch models.
Time Setting
1. Pull crown out to position 2.
2. Turn counter-clockwise to advance the time and continue until the day changes
to the present day.
3. Set to the correct time.
ANALOG INSTRUCTIONS
Time Setting
1. Pull the crown out to position 2.
2. Turn the crown to set the hour and minute hands
to the desired time.
3. Return the crown to position 1.
012
Rotate to set hour &
minute hands. Date
advances with each
24 hour rotation of
hour hand.
RAPID CORRECTION
OF DATE
CLOSED