Quick Start Guide

7. Once paired, the Swivel Jack RTX light will change to either solid blue
or blink twice every 5 seconds if in Low Latency mode. (Refer to LED
Light Guide.)
8. Connect the Swivel-jack RTX to a stereo auxiliary input or a powered
speaker system.
9. To begin streaming music wirelessly, simply press the play button on
your audio source, adjust the volume as needed and enjoy!
10. If you want to pair to a second device:
1. PairyourrstphoneortablettotheMiccus®SwivelJackRTX,
(steps 1-7 above)
2. PresstheSwivelJack’smul-funconbuonfor3secondsunl
thelightbeginsrapidlyashingBlue.
3. Open the Bluetooth menu on your phone or tablet and select
Swivel Jack RTX. If a passkey is required, use “0000”.
4. Wait for the devices to connect. This may take up to 30 seconds.
5. Once paired, the Swivel Jack RTX’s light will change to either solid
Blue or slow double blinks twice if connected in aptX Low
Latency. (Refer to LED Light Guide)
6. When2transmingarepaired,bothblueLEDsarelitbeneath
themil-funconbuon.
NOTE: In RX (receive mode) two phones or tablets can be simultaneously
pairedwiththeSwivelJackRTX,butonly1deviceatamecanstream
audiototheSwivelJackRTX.Shitheaudiofreelybetweendevicesby
pausing the audio on one and pressing play on the other.
Reconnecon:
Now that the Swivel-Jack RTX is paired, if left powered on or if powered
back on, the Swivel Jack RTX will automatically reconnect to the last paired
device when within range.
Factory Reset
10