User Guide

9
Receive (RX mode): Pairing with a Bluetooth
®
transmitter
• Power on the RTX: press and hold the power
button (3 seconds) until the indicator light begins
ashing.
• Press and hold the RX button 3 seconds; the
indicator light will ash red and blue.
• Power on your A2DP Bluetooth
®
prole
transmitting device and engage pairing mode.
• When pairing is complete, the RTX indicator will
light a solid blue.
Note: For optimal connection, the Miccus
®
Home RTX
and your Bluetooth
®
device should be no more
than 1 meter (3ft) apart when pairing.
To begin streaming audio simply press the play button
on your audio source and adjust volume to taste. By
design the Home RTX is a passive transmitter or receiver
and has no volume control. User volume level must be
adjusted via the input and/or output sources
connected to the Miccus Home RTX.
Factory Reset
To reset pairing memory, simply unplug the Home RTX
from USB power for 20 seconds. The Home RTX
remembers only one device pairing at a time, and once
it is disconnected from power it will clear the pairing
from memory