Owner`s manual

To delete WLAN settings, reset the player to factory default through the System Settings menu.
9.4.3 PPPoE Setup
If the player is connected directly to a PPPoE connection, such as DSL modem, the player can
be configured with the PPPoE user name and password.
Setting
Description
Wired or Wireless
Select which connection should the player attempt to access the PPPoE
network.
User
ID
Enter the PPPoE user name using the remote control and the on-screen
keyboard
Password
Enter the PPPoE password using the remote control and the on-screen
keyboard
9.4.4 Network Info
This setting displays the current wire and wireless network status of the player. If the player has
a valid network connection, the associated IP address will be displayed. Otherwise, the IP
address will be listed as N/A.
9.4.5 BT Process
This setting controls whether the BitTorrent client of the player runs. A SATA hard disk drive or
USB drive must be installed to use this feature. Turn this setting on only when it will be used and
turn it off when finished to reduce processor load. This function is for expert users who are
already familiar with how BitTorrent works. Please refer to ‘8.2 BitTorrent Client’ for more
information.
Available settings: On, Off
9.4.6 SAMBA Process
This setting controls whether the SAMBA service of the player runs. When turned on, this player
will be visible on the local area network and all storage devices attached to the player will be
available as shared folders. This is useful for copying/moving/deleting files on the storage
devices, or for using other network media players to play videos stored on this player.
Available settings: On, Off
9.4.7 BT & SAMBA Security
This setting controls whether a username and password will be required to access the BitTorrent
and SAMBA service of the player. The login credentials are:
USERNAME: admin
PASSWORD: 123
Available settings: On, Off
9.4.8 SMB Hostname
Configures the host name for the player’s SAMBA file server. This is required for the player’s