Owner`s manual

4) If the WPA/WEP key was entered correctly, the player will receive an IP address and
connection settings from the access point router. These settings will be displayed on the
screen; press the 7%0 key on the remote control to continue.
5) Once the WLAN setup has been completed successfully, press the 0/ button on
the remote control to go back to the Network Settings screen.
The WLAN settings will be remembered and used each time the player turns on. Up to three
connection settings can be stored although the first one will always be used by default. The
other two setting memory slots are useful if the player will sometimes be used at a different
location.