Owner`s manual

RAW
Audio is sent without being decoded by the player. The home theater
receiver must be able to decode the audio; otherwise there will be no
audio playback.
9.2.7 AAC Output
This setting specifies the audio output format for AAC audio tracks.
Setting
Description
LPCM
Audio is decoded by the player and down-mixed into two channels. Use
this setting if the TV or home theater receiver cannot decode AAC audio.
RAW
Audio is sent without being decoded by the player. The home theater
receiver must be able to decode AAC audio; otherwise there will be no
audio playback.
9.2.8 WMA Pro Output
This setting specifies the audio output format for WMA Pro audio tracks.
Setting
Des
cription
LPCM
Audio is decoded by the player and down-mixed into two channels. Use
this setting if the TV or home theater receiver cannot decode WMA Pro
audio.
RAW
Audio is sent without being decoded by the player. The home theater
receiver must be able to decode WMA Pro audio; otherwise there will be
no audio playback.
9.3 Video Settings
The video settings menu contains configuration items for the player’s video outputs.
9.3.1 Aspect Ratio
Aspect Ratio affects how the player will display content on the TV. It is very important to set the
aspect ratio to match the TV, incorrect setting will result in distorted image output.
Setting
Description
Pan Scan 4:3
Use with 4:3 non-widescreen TVs. Widescreen videos will have the left
and right side cut off, with the center portion of the image filling the 4:3
TV screen.
Letter Box 4:3
Use with 4:3 non-widescreen TVs. Widescreen videos will be displayed
with black bars on the top and bottom of the image.
16:9
Choose this setting if the TV has a 16:9 aspect ratio.
16:10
Choose this setting if the TV has a 16:10 aspect ratio, such as certain
computer monitors.
9.3.2 TV System
The player is able to output video in a wide range of video systems over HDMI or component
video. Consult the TV/HDTV’s manual for which video system it supports. For best results,