User's Manual

11
SmartTVOke Layout
1. CH. A/B LEDs - Indicates connection status of each microphone.
2. Status LED - Visually confirms all buttons pressed on each of the microphones.
•The LED will flash once for every button pressed on either microphone.
3. Power Button/Pair ID - Turns receiver OFF/ON.
•This button also toggles the microphone pairing mode.
4. Microphone Out - Provides microphone output only.
5. Optical Input - Accepts digital audio from music sources (PCM only).
•The SmartTVOke is not compatible with Dolby audio signals.
6. Audio Mixed Out - Provides both microphone and music output.
7. Audio In - Connect a music source that uses the 1/8” audio jack.
8. Power In - Power cord connects here. Any adapter will work if rated at 5V DC.
Front
Rear