Certifications 2

according to UK REACH Regulation
Safety Data Sheet
mibenco gmbh
Felgenfolie
Revision date: 30.09.2021 Product code: 7100 Page 4 of 11
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Remove all sources of ignition. Provide adequate ventilation. See protective measures under point 7 and 8.
General measures
Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
6.2. Environmental precautions
6.3. Methods and material for containment and cleaning up
Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Treat the
recovered material as prescribed in the section on waste disposal. Treat the recovered material as prescribed
in the section on waste disposal. Suitable material for taking up: diatomaceous earth.
Other information
See protective measures under point 7 and 8.
6.4. Reference to other sections
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Information for safe handling: If handled uncovered, arrangements with local exhaust ventilation have to be
used. The following must be prevented: inhalation. skin contact. Eye contact.
Advice on safe handling
Vapours may form explosive mixtures with air.
Advice on protection against fire and explosion
Take off contaminated clothing. Wash hands before breaks and after work. When using do not eat or drink. If
technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Advice on general occupational hygiene
7.2. Conditions for safe storage, including any incompatibilities
Keep container tightly closed. Take precautionary measures against static discharges.
Only use the material in places where open light, fire and other flammable sources can be kept away. Keep
only in the original container in a cool, well-ventilated place.
Requirements for storage rooms and vessels
Materials to avoid: Acid. Base. Oxidizing agents. Paper.
Hints on joint storage
Store only in original container. Protect against: heat. Heating causes rise in pressure with risk of bursting.
Further information on storage conditions
7.3. Specific end use(s)
Aerosol Paint, Varnish.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Print date: 30.09.2021 GB - ENRevision No: 1,07