User's Manual

3.2 Installation conditions
Before installing the reader, please carefully check whether the product is in good
condition and whether the accessories are complete. If there is damage or shortage,
please contact the supplier in time。
3.3 Device connection
3.3.1 Connect to power adapter
☆ Plug the power cord into the AC power supply socket, and then plug the other
end of the power cord into the power interface of the reader and fasten it.
3.3.2 Connect to PC
☆ The RS232 interface is used for short-distance communication (not greater than
10m), and it can be connected to the PC serial port through the DB9 connector to
realize the communication between the PC and the device;；
☆The RJ45 network port is used for long-distance communication (not greater than
80m), and an extended network cable can be used to connect to the PC。
3.4 Install device
According to the on-site application, install the reader in the cabinet or box for easy
maintenance.
3.5 Acceptance
The acceptance criteria are given mainly from two aspects: structure and
performance.