User's Manual

2. click【Connect】， A small box will pop up as shown in the figure below
3. Select the correct serial port number, and then select the baud rate【Baud rate is
115200 by default】（ If the parameter has been modified, you need to select the
corresponding parameter, otherwise it cannot be connected）
4. click【Connect】， If the connection is successful, you will be prompted at the bottom
left of the software interface：Connect succeed，The corresponding version number
will be displayed at the bottom right of the interface，The current version number is：
2.0；1.10（The version number will be updated at any time）As shown in the figure
below：