User's Manual

4.6 Demo software operation
All functions can be operated only after successful connection. Double click on
the Demo application
Please refer to the documentation for all Demo procedures and processes：
4.7． Software
【SingleReaderTest_C#_Software operation instruction_20190822】
Instructions for use：
The demo software is only used for configuration parameters and debugging
demonstration, not for other commercial purposes.
This software is not the final version and will be updated continuously in the
future. If there is a bug, please give feedback. If it brings you bad experience, we
are sorry.
Tip: before running the software, please check the following steps。
1、Whether the power supply of the equipment is normal (stable power supply 12V ~ 24V / 3a)
2、Whether the data cable connection is normal (serial port cable and network cable)
3、Whether the antenna connection is normal (feeder and antenna port)
4、Whether the working indicator of the device is normal (the four channel reader is in red when it is powered
on; When the 16 channel reader / writer is powered on, the display is blue, and the card readers are all
flashing blue.)
1．Function
This software does not need to install, after decompression can run
2. Interface description