Specifications

(Fig. 4)
Step 3) Front Wheel Alignment & Attachment
A. Place fender braces on each side of axle. Attach fender braces to fork eyelets
with screws provided. (Fig. 4)
B. Remove axle nuts and safety washers. Drop wheel in fork and center. Electric
wires belong on the same side as the chainwheel.
C. Replace safety washers and install axle cover bracket (A) on side that has the
wires. (Fig. 5)
D. Thread on axle nuts, center wheel and tighten. (Torque 180 to 240 in. lbs.)
E. Connect wires (B) and install axle cover with two metal screws to the cover
bracket. (A)
Please note to take extra care in connecting the male and female plugs (B) on the wire
and be sure that the parts are well seated.
F. “ Warning: Do not ride without safety fork washers. (C)”
(Fig. 5)
C
A
B
10
ev3man99.qxd 6/22/99 1:21 PM Page 10