User Manual

Installation

1. Drill holes

Place the base in the position the ceiling light will be installed, and mark the positions

of the mounting holes, then remove the base. Use a φ6 mm drill to drill holes with a

depth of at least 40 mm, then insert the included four wall plugs into the holes.

Note: Try to wiggle the base around to make sure it is properly and firmly installed.

Otherwise, it may fall down.

2. Fix the base

Lead the stripped wires through the wiring hole in the base, and then align the

mounting holes with the wall plugs. Screw the included four self-tapping screws into

the wall plugs to fix the base onto the ceiling. Make sure the base is securely installed.