Operating instructions

10 Wet/Dry Vac Operator's Manual
TROUBLESHOOTING
SYMPTOM PROBABLE CAUSE REMEDY
Wet/Dry Vac will not start. Power Cord is disconnected. Ensure Power Cord is securely
connected to the unit and to the
power source. If using an
extension cord, ensure the power
cord and extension cord are
securely connected.
Circuit overload. Check breaker or fuse panel.
Brushes on motor are worn. Contact your Customer Service.
Inadequate suction. Flexible Hose is obstructed, cut or Clean or replace Flexible Hose.
damaged.
Wand or attachment is obstructed. Clear obstruction.
Wet/Dry Filter is full of dirt. Clean or replace.
No suction. Canister is full. Empty Canister.