Owner Manual
16 Propane Patio Heater Manual
STEP 8
Connect Hose & Regulator to Cylinder
Specications
• You must provide propane gas and propane cylinder. Use a standard 20 lb. propane cylinder only.
• Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard
for Storage and Handling of Liqueed Petroleum Gas, ANSI/NFPA58. Your local library or re depart-
ment should have this book.
• The minimum permissible gas supply pressure of 10 W.C. is required for purpose of input adjust-
ment.
• The minimum hourly of 17000 Btu is required input rating for a heater for automatic operation at rat-
ings less than full input rating.
• The pressure regulator and hose assembly supplied with the appliance must be used.
• The installation must conform with local codes, or in the absence of local codes, with National Fuel
Gas Code, ANSI Z223.1 .
• A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your
cylinder supplier. Never use a propane cylinder with a damaged valve connection.
• The propane cylinder must be constructed and marked in accordance with the specications for LP
gas cylinders of the U.S. Department of Transportation (DOT}.
• Never connect an unregulated propane cylinder to the heater.
• Attach regulator to cylinder.
• Complete attachment.
• Install cylinder.
ASSEMBLY