Owner Manual
Propane Patio Heater Manual 13
STEP 3
Attach Post to Cylinder Housing
• Attach the post support on base with 3 M8x16 Bolts. Attached the pole on the top of post support
with 6 M6x30 Bolts and nuts.
• Tighten Bolts and cover with the Cylinder Housing.
STEP 4
Attach Reector Studs to Screen Cover
• Insert 3 Reector Studs.
• Tighten Studs securely.
•
STEP 5
Attach Head Assembly to Post
• Screw off 4 small bolts.
•
•
ASSEMBLY
(3) Required Studs
(4) Required Small Bolts Head Assembly