Owner Manual
Propane Patio Heater Manual 11
ASSEMBLY
COMPONENTS
Remove all components from package.
ADDITIONAL REQUIREMENTS
The following items are not included, but are necessary for the proper assembly of your heater, DO NOT at-
tempt to assemble without proper tools.
Philips screwdriver w/medium blade.
Adjustable opening wrench.
Leak Detection Solution (Instructions on how to make solution are included in step)
Note: You must follow a II steps to properly assemble heater.
STEP 1
Attach Wheel Assembly to Base
• Line up holes in Wheel Bracket with corresponding holes in base, insert 2 large bolts through holes
and nger tighten 2 Large Nuts.
• Be sure that the Wheel Assembly is parallel to the base, and fully tighten bolts.
HARDWARE
Description Picture Qty.
Large Bolt 2
Small Nuts 4
Small Bolt 8
M6x30 Bolt 6
M8x16 Bolt 3
Large Flat Washer 6
Cap Nut 9
Large Nuts 2
Small Screw 9
Wing Nut 3
Reector Stud 3
Wrench 1