Operator`s manual

14 Kerosene Portable Heater Manual
TO RESTART HEATER
CAUTION: DO NOT RESTART HEATER UNTIL COOLING CYCLE IS FINISHED.
The cooling cycle cools the combustion chamber.
1. Wait until cooling cycle is nished after stopping heater.
2. Repeat steps under TO START HEATER.
LONG-TERM STORAGE OF HEATER
1. Remove drain nut from rear bottom side of fuel tank by unscrewing nut and drain.
2. Using a small amount of kerosene, swirl and rinse the inside of the tank. NEVER MIX WATER WITH
KEROSENE, as it will cause rust inside the tank. Pour the kerosene out, making sure that you remove it
all.
IMPORTANT: Do not store kerosene over summer for use during next heating season. Using old fuel may
damage heater.
3. Reinstall drain bolt as follows:
Insert bolt’s seal head fully into drain hole so that ange is
ush to tank’s bottom.
Insert seal cap fully into head hole so that cap ange is ush
to head ange.
IMPORTANT: Reinstall bolt fully into hole in tank; otherwise it will not
seal completely.
Make sure storage place is free of dust and corrosive fumes.
Store the heater in the original box with the original packing
material and keep USER'S MANUAL with heater.
OPERATION