Product Manual

DIRECT DRIVE MODELS
MODEL NUMBER PSI GPM HORSEPOWER/MOTOR PUMP PLUG TYPE
BURNER FUEL
TANK CAP.
BURNER
FUEL CONS.
BTU PER
HOUR DIMENSIONS (LxWxH) SHIP WT. NET WT.
HSE-1002-0MG10
1000 2.0 1.5 HP, 120V, 1Ø, 15.0A General NEMA 5-15P 4.0 gallon 1.33 gph 186,000 43in.x29.5in.x36.5in. 418 lb. 295 lb.
HSE-1002-0MM11
1000 2.0 1.5 HP, 120V, 1Ø, 15.0A Mi-T-M NEMA 5-15P 4.0 gallon 1.33 gph 186,000 43in.x29.5in.x36.5in. 410 lb. 237 lb.
HSE-1502-0MG10
1500 2.0 2.0 HP, 120V, 1Ø, 19.0A General NEMA 5-20P 4.0 gallon 1.21 gph 169,000 43in.x29.5in.x36.5in. 422 lb. 299 lb.
HSE-1502-0MM11
1500 2.0 2.0 HP, 120V, 1Ø, 19.0A Mi-T-M NEMA 5-20P 4.0 gallon 1.21 gph 169,000 43in.x29.5in.x36.5in. 414 lb. 291 lb.
HSE-2003-0MG10
2000 2.8 4.0 HP, 230V, 1Ø, 18.0A General NEMA 6-20P 4.0 gallon 1.53 gph 214,000 43in.x29.5in.x36.5in. 439 lb. 316 lb.
HSE-2003-0MM11
2000 2.8 4.0 HP, 230V, 1Ø, 18.0A Mi-T-M NEMA 6-20P 4.0 gallon 1.53 gph 214,000 43in.x29.5in.x36.5in. 431 lb. 308 lb.
BELT DRIVE MODELS
MODEL NUMBER PSI GPM HORSEPOWER/MOTOR PUMP PLUG TYPE
BURNER FUEL
TANK CAP.
BURNER
FUEL CONS.
BTU PER
HOUR DIMENSIONS (LxWxH) SHIP WT. NET WT.
HSE-2504-0M10
2500 3.2 6.0 HP, 230V, 1Ø, 25.0A General NEMA 6-30P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 699 lb. 569 lb.
HSE-2504-0M30
2500 3.2 6.0 HP, 230-460V, 3Ø, 16.0A General NEMA L15-20P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 688 lb. 558 lb.
HSE-3004-0M10
3000 3.5 8.0 HP, 230V, 1Ø, 36.0A General NEMA 6-50P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 737 lb. 607 lb.
HSE-3004-0M30
3000 3.5 8.0 HP, 230-460V, 3Ø, 24.0A General NEMA L15-30P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 732 lb. 602 lb.
HSE-3504-0M10
3500 3.3 10.0 HP, 230V, 1Ø, 39.0A General NEMA 6-50P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 761 lb. 631 lb.
HSE-3504-0M30
3500 3.3 10.0 HP, 230-460V, 3Ø, 28.0A General NEMA L15-30P 10.0 gallon 2.10 gph 294,000 49.5in.x28in.x40.5in. 742 lb. 612 lb.
Pump
- Direct or belt drive triplex General or Mi-T-M pump with ceramic plungers
- Stainless-steel and brass unloader valve
- Forged brass manifold
- Thermal relief valve
- High pressure detergent injection (Available as an option on 0MM11 models)
Motor
- Totally enclosed fan-cooled electric motor with manual thermal
overload protection
- 35-foot power cord with in-line GFCI which meets required
CSA certification (GFCI not available on 3000 & 3500-PSI models)
- Solid state electronic ignition
Frame
- Reinforced powder coated steel tube frame with center
balanced lifting hook
- Powder coated steel hose reel mounting bracket (Belt drive models)
- Electric cord hanger
- Powder coated steel gun/wand holder
- Solid steel threaded axles (2500 to 3500-PSI models)
- Four pneumatic tires with locking tire brake
Components
- Energy-efficient top-fired heat exchanger designed for
convenient troubleshooting and easy maintenance
- High-quality fuel filter/water separator ensures clean fuel supply
- Heavy-duty dual cogged belt drive system to prevent
slippage (Belt drive models)
- Complete system diagnostic board
- Float tank (Not available on 0MM11 models)
- Pressure and high limit safety controls
- No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time)
- Polyethylene burner fuel tank
- Easy coil drain helps prevent freezing in cold weather
Units Include:
- Quick connect nozzles (0°, 15°, 25° and 40°) (1000 to 2000-PSI models)
- 15° fixed and detergent nozzle (2500, 3000 & 3500-PSI models)
- 50-foot x
3
⁄8-inch steel wire-braided pressure hose with quick connects, swivel
and bend restrictors (Screw connects on 2500 to 3500-PSI models)
- Professional-grade insulated trigger gun with safety lock-off
- Adjustable pressure insulated dual lance
The HSE Series works great in industrial applications requiring 20 or more hours per week and is built for
longevity. The top-fired heat exchanger is energy efficient and designed for convenient troubleshooting.
P R E S S U R E W A S H E R S
Hot Water Electric Direct/Belt Drive
HSE Series
Miscellaneous
- Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F
- Water output temperature is 190°-200°F
Warranties
HSE-2003-0MG10
1
YE A R
LI M IT E D
EL E CT R IC MO T OR
WAR R AN T Y
3
YE A R
LI M IT E D
CO I L
WAR R AN T Y
7
YE A R
LI M IT E D
PU M P
WAR R AN T Y
20 Mi-T-M Corporation 800-553-9053 www.mitm.com
Redesigned Direct
Drive Models