Brochure

MODEL NO.
MH-0075-0M10 MH-0135-0M10 MH-0190-0M10 MH-0215-0M10 MH-0400-0M10 MH-0600-0M10
HEAT OUTPUT
75,000 BTU 135,000 BTU 190,000 BTU 215,000 BTU 400,000 BTU 600,000 BTU
HOT-AIR FLOW
240 CFM 540 CFM 630 CFM 670 CFM 1,400 CFM 3,000 CFM
AIR PUMP PRESSURE
4.0 PSI 5.0 PSI 7.5 PSI 9.0 PSI 125 PSI 128 PSI
AC POWER
120V, 60Hz, 1.5 Amps 120V, 60Hz, 2.3 Amps 120V, 60Hz, 2.7 Amps 120V, 60Hz, 2.8 Amps 120V, 60Hz, 3.0 Amps 120V, 60Hz, 5.5 Amps
MOTOR SIZE
1/8 HP 1/5 HP 1/4 HP 1/3 HP 1/2 HP 5/8 HP
FUEL TANK CAPACITY
5.0 gallons 10.0 gallons 13.0 gallons 13.0 gallons 24.0 gallons 40.0 gallons
FUEL CONSUMPTION
0.56 gal./hr. 1.00 gal./hr. 1.42 gal./hr. 1.63 gal./hr. 3.00 gal./hr. 4.50 gal./hr.
MAX. OPERATING HOURS
8.9 hours 10.0 hours 9.1 hours 8.0 hours 8.0 hours 8.9 hours
HEATING AREA
1,700 sq. ft. 3,100 sq. ft. 4,300 sq. ft. 5,300 sq. ft. 10,000 sq. ft. 15,000 sq. ft.
MULTI-FUEL CAPABLE
Yes Yes Yes Yes Yes Yes
DIGITAL TEMP. READ-OUT
No Yes Yes Yes No No
ERROR INDICATOR READ-OUT
No Yes Yes Yes Yes Yes
PARTS STORAGE SYSTEM
No Yes Yes Yes Yes Yes
DIMENSIONS (LxWxH)
30x13x15in. 37x22x25in. 42x24x26in. 42x24x26in. 53x30x36in. 75x34x43in.
SHIP WT.
33 lb. 57 lb. 65 lb. 68 lb. 159 lb. 376 lb.
NET WT.
28 lb. 51 lb. 58 lb. 61 lb. 150 lb. 320 lb.
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances.
Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information. These specifications are estimates only.
96
Motor:
– Heavy-duty, high quality cast aluminum
enclosed electric motor
Burner Head:
– 1-piece cast aluminum
Components:
– High performance fan
– Built-in temperature control thermostat
with control dial
– Integral overheat and flame-out safety
– Fuel gauge
– Sure start ignition for cold temperature starts
– Dual connector ignition
Limited Warranty:
– 1 year
Certification:
– CSA Certified - US and Canada
Factory Tested for Multiple Fuels:
– Kerosene
– JP8/Jet A fuel
– No. 1 and No. 2 fuel oil
– No. 1 and No. 2 diesel fuel
Important Notes:
– Not for use in residential living areas
or inadequately ventilated areas
– Proper ventilation required during operation
– Must be plugged into an approved standard
electrical outlet for operation
Heat when and where you want it. Portable kerosene forced air heaters provide consistent
and reliable heat for a comfortable work environment. Available in many sizes, they are perfect
for heating everything from garages and workshops to warehouses and construction sites.
Kerosene Forced Air
75,000 up to 600,000 BTU
Portable Heaters
MH-0190-0M10