Brochure

Sand Injector
Wet sandblasting is efficient and dust-free. Remove coatings from steel
and concrete surfaces. Can be used on rust, paint, stains and graffiti.
AW-3000-0000 (Sand injector - carbide tip)
– Includes sand probe and clear hose
– 5500-PSI rated
– Consult factory before ordering
18-0113 (Carbide replacement nozzle)
Low Pressure Detergent Injectors
Apply recommended detergents with the
low pressure detergent injector. Can be
used on cars, boats, vans and engines.
AW-8400-0021 (4500-PSI)
AW-8000-0001 (3500-PSI)
– Adjustable chemical draw
– Clear, pliable detergent hose
– Solid brass body with stainless-steel orifice for durability
– Quick connects for easy installation
High Pressure
Detergent Injector
Large tasks become small with the
high pressure detergent injector. High pressure water mixes
with detergent to clean even the heaviest build-up. Can be
used on farm equipment, tractor trailers, RVs and bridges.
50-0161
– Brass and stainless-steel construction
– 2.0 to 6.0-GPM operating capacity
– Steel mesh in-line water strainer
Extension Hoses
When you need extra mobility and length.
Cold Water Extension Hoses
851-0338 (4000-PSI, R1)
851-0006 (4500-PSI, R2)
851-0317 (6000-PSI, R2)
– 50-foot x
3
⁄8-inch ID
– Non-marking
– Includes quick connects,
swivel and bend restrictors
– Chemical resistant
– Wire-braided
15-0273 (4000-PSI, R1)
– 100-foot x
3
⁄8-inch ID
– Non-marking
– 250°F temperature rating
15-0365 (7200-PSI, R3, black)
– 50-foot x
3
⁄8-inch ID
851-0420 (7000-PSI, R2, black)
– 50-foot x
3
⁄8-inch ID
– Includes quick connects
15-0006 (Industrial water supply)
– 50-foot x
3
⁄4-inch
Hot Water Extension Hoses
Steam Hose
15-0077 (Steam combination, 3000-PSI, R1)
– 50-foot x
3
⁄8-inch
– 250°F temperature rating
Hoses with Screw Connects
850-0174 (2500-PSI, R1)
850-0199 (4500-PSI, R2)
– 50-foot x
3
⁄8-inch ID
– 250°F temperature rating
– Includes screw connects, swivel
and bend restrictors
Hoses with Quick Connects
850-0433 (4500-PSI, R2)
851-0262 (3000-PSI, R1)
– 50-foot x
3
⁄8-inch ID
– 250°F temperature rating
– Includes quick connects, swivel
and bend restrictors
Bare Hoses
15-0146 (3000-PSI, 50-foot x
3
⁄8-inch, R1)
15-0160 (5800-PSI, 75-foot x
3
⁄8-inch, R2)
15-0161 (5800-PSI, 100-foot x
3
⁄8-inch, R2)
15-0162 (5800-PSI, 150-foot x
3
⁄8-inch, R2)
15-0163 (5800-PSI, 200-foot x
3
⁄8-inch, R2)
–
3
⁄8-inch male swivel
– 250°F temperature rating
– For use with hose reels
851-0338
15-0365
15-0077
15-0161
15-0006
850-0433
AW-3000-0000
Pressure Washer
Accessories
Injectors & Extension Hoses
32