Specifications

Preparing the Washer

Operator’s Manual 17

IMPORTANT: If washer is to be connected to a well water

system, use 851-0207 water inlet lter (A).

This will increase sand ltering capability

and avoid damage to the pump.

CONNECT HOSES AND PRIME PUMP

1. Hose washer with screen (A) is already attached into

end of brass hose coupler.

NOTE: Conical screen in washer (A) should protrude out of

coupler and into ow from inlet hose.

2. Install inlet water hose (A) and hand tighten. Install high

pressure discharge hose (B) with quick connect.

↑