Brochure

NEMA 5-15P,
15-amp plug
NEMA 5-20P,
20-amp plug
NEMA 6-20P,
20-amp plug
MODEL NUMBER PSI GPM HORSEPOWER/MOTOR PUMP Mi-T-M NO. PLUG TYPE
BURNER FUEL
TANK CAP.
BURNER
FUEL CONS.
BTU PER
HOUR
DIMENSIONS
(LxWxH) SHIP WT. NET WT.
HSE-1002-0MG10 1000 2.0 1.5 HP, 120V, 1Ø, 15.0A General 3-0071 NEMA 5-15P 4.0 gallons 1.33 gph 186,000 43x29.5x36.5in. 418 lb. 295 lb.
HSE-1002-0MM11 1000 2.0 1.5 HP, 120V, 1Ø, 15.0A Mi-T-M 3-0383 NEMA 5-15P 4.0 gallons 1.33 gph 186,000 43x29.5x36.5in. 410 lb. 237 lb.
HSE-1502-0MG10 1500 2.0 2.0 HP, 120V, 1Ø, 19.0A General 3-0071 NEMA 5-20P 4.0 gallons 1.21 gph 169,000 43x29.5x36.5in. 422 lb. 299 lb.
HSE-1502-0MM11 1500 2.0 2.0 HP, 120V, 1Ø, 19.0A Mi-T-M 3-0383 NEMA 5-20P 4.0 gallons 1.21 gph 169,000 43x29.5x36.5in. 414 lb. 291 lb.
HSE-2003-0MG10 2000 2.8 4.0 HP, 230V, 1Ø, 18.0A General 3-0168 NEMA 6-20P 4.0 gallons 1.48 gph 207,200 43x29.5x36.5in. 439 lb. 316 lb.
HSE-2003-0MM11 2000 2.8 4.0 HP, 230V, 1Ø, 18.0A Mi-T-M 3-0420 NEMA 6-20P 4.0 gallons 1.48 gph 207,200 43x29.5x36.5in. 431 lb. 308 lb.
PART NUMBER DESCRIPTION FITS MODELS
50-0161 High pressure detergent injector All models
850-0433 50-ft. x
3
⁄8 -in. high pressure hose All models
HX-0232 300°F steam HSE-1002-0MG10
HX-0233 Adjustable thermostat, 86°-248°F All models
HX-0235 Hour meter All models
HX-0237 Auto start/stop HSE-1002-0MM11
HX-0238 Time delay shutdown HSE-1002-0MM11
HX-0239 300°F steam HSE-1002-0MM11
PART NUMBER DESCRIPTION FITS MODELS
HX-0240 300°F steam HSE-2003-0MG10
HX-0241 300°F steam HSE-2003-0MM11
HX-0243 Auto start/stop 2000-PSI models
HX-0244 Time delay shutdown 2000-PSI models
HX-0245 300°F steam HSE-1502-0MM11
HX-0246 300°F steam HSE-1502-0MG10
HX-0275 Auto start/stop HSE-1502-0MM11
HX-0276 Time delay shutdown HSE-1502-0MM11
Pump:
Equipped with the Mi-T-M Pressure Relief Start which eliminates
pressure build-up in the system (0MM11 models)
n
Forged brass
manifold
n
Thermal relief valve
n
High pressure detergent injector
(Available as an option on 0MM11 models)
Motor:
Totally enclosed fan-cooled electric motor with manual thermal
overload protection
n
35-foot power cord
Frame:
Reinforced powder coated steel tube frame with center balanced
lift
n
Convenient gun/wand holder and hose wrap
n
13-inch
flat-free tires
Components:
Energy-efficient top-fired heat exchanger
n
No. 1 or No. 2 diesel
or kerosene fired burner (Not approved for bio-fuel)
Miscellaneous:
Temperature rise 150°F/66°C above ambient, maximum outlet
temperature is 200°F
Unit Includes:
Quick connect nozzles - 0°, 15°, 25° and 40°
n
50-foot x
3
⁄8-inch
steel wire-braided high pressure hose with quick connects
n
Professional-grade insulated trigger gun with safety lock-off
n
Adjustable pressure insulated dual lance
Limited Warranties:
1 year electric motor
n
3 year coil
n
7 year General and Mi-T-M
pumps
Certification:
CSA Certified - US and Canada
HSE Series
Hot Water – Electric – Direct Drive
28
Accessories & Options:
This series is great for industrial cleaning on
construction sites, farms, mining and oil fields where
nasty grime, oil and dirt is everywhere. Highly efficient,
it can tackle the really tough jobs where heat and power
are a must. The powder coated steel frame makes it
extremely durable and rugged for industrial sites.
PRESSURE WASHERS
HSE-2003-0MG10