Specifications

4 63D4004
QUESTIONS?
Log Length 20"
Maximum burn time
1
10 hours
Average area heated (sq.ft)
1
2,200 sq. ft.
Range of heat output
2
11,000-30,600
Maximum heat output
1
55,400
EPA emissions rating (g/h, non-catalytic)
2
3.5 gph
Weight 360 lbs
Loading Front
Air Control Manual
1. Maximum burn times and heat outputs are based on laboratory testing and may vary in individual use depending on how
the insert is operated, type and moisture content of fuel, and other factors. Maximum burn times are achieved under
different operating conditions than are maximum heat outputs. These values are based on operation in building code-
conforming homes under typical winter climate conditions in the U.S. If your home is of nonstandard construction (e.g.
unusually well-insulated, not insulated, built underground, or if you live in a more severe and more temperate climate),
these fi gures may not apply. Since so many variables affect performance, consult your Lexington Forge Authorized
Dealer to determine realistic expectations for your home.
2. Under specifi c conditions used during EPA emissions testing.
NEED TO ASK QUESTIONS? REQUIRE PARTS INFORMATION?
First, contact the Lexington Forge Dealer from whom you purchased your insert, for parts and service. Have the following
information ready:
Model and product serial numbers can be found on the certifi cation label of your insert.
• Date of purchase:
• Serial number (from the back of your insert):
• Model number (from the back of your insert):
• Dealer name and phone:
If you still need assistance, contact Lexington Forge technical support (below).
WONDERING ABOUT THE WARRANTY?
See the last page of this manual for general warranty information. For additional information, contact your Lexington
Forge dealer or Lexington Forge Parts and warranty.
Lexington Forge
Technical Service, Parts & Warranty
Phone: [phone]
Fax: [phone]