Operating instructions

8

DFX & DBX Series Vent Free Fireplaces


Carefully select the best location for installation of your unvented replace. The following factors
should be taken into consideration.
• Clearance to side wall, ceiling, woodwork and window or other combustibles. Refer to “Clear-
ances” section on . Minimum clearances to combustibles 
• Location must not be affected by drafts caused by kitchen exhaust fans, ceiling fans, return
air registers for forced air furnaces / air conditioners, windows or doors.
• Installation must provide adequate ventilation and combustion air.
• 

• Location should be out of high trafc areas and away from furniture and draperies due to
heat from rebox.
• Never obstruct the front opening of the unvented replace or restrict the ow of combustion
and ventilation air.
• Minimize modications to existing construction. below for location sugges-
tions.
• Do not install in the vicinity where gasoline or other ammable liquids may be stored. The
unvented rebox must be kept clear and free from the combustible materials.
FP2440
fireplace locations
Figure 3 -
Possible Fireplace Locations
FP440