Operating instructions

14 33D4051
REMOVING SCREEN
1. Remove bottom louver. See Figure 14.
2. Removingreplacescreenframepanelbypushingscreenframepanelupandout.See Figure 14.
GENERAL INSTALLATION INFORMATION
Figure 15 - Canopy Installation
INSTALLING CANOPY
1. Push louvers up and out to remove top louver assembly.
2. Aligntheblackcanopywiththeholesinthetopframeassembly.See Figure 15.
3. Installthethree (3)screws(in owner’s manualpackaging)whichattach thecanopyto thetopframeassembly.See
Figure 15.
4. Tightenallscrews.Makesurethecanopyislevelandsecure.Installtoplouverassembly.
Figure 14 - Removing Fireplace Screen Frame Panel
NOTE: Fireplace screen must be removed to access log box and to install canopy.
Canopy
Fireplace
Screen
Canopy
Screws
WARNING
Do not operate the unit without the
screen frame panel and canopy
installed.
Louver