Operating instructions

33D4051 11
GENERAL INSTALLATION INFORMATION
INSTALLING OPTIONAL FIREBRICK PANELS
1. Removeoptionalrebrickpanelsfrompackaging.ChecktoSeethatyouhavethefollowing:
•3rebrickpanels •two(2)retainerbrackets •two(2)blackscrews
 Ifanypartorpartsaremissing,contactdealerwhereyouboughtreplace.
2. Turnoffreplaceandallowtocool.
3. Remove replace screen (See Figure 14, page 14) andlogs.
4. Place rear rebrick panel on back wall of rebox. Set bottom of panel behind the bracket tabs of the grate. See
Figure 4.
5. Placeoneofthesiderebrickpanelsincabinet.Lineuptheholeintheretainerclipwiththeholeinsidetherebox.
UsingPhillipsscrewdriver,attachtheretainerbrackettoinsideofrebox.See Figure 5.
6. Repeatstepvefortheotherrebricksidepanel.
Figure 4 - Installing Back Firebrick Panel
Figure 5 - Installing Side Firebrick Panel
Bracket
Tabs
Rear
Firebrick
Panel
Retainer
Clip
Side Firebrick
Panel
Screw
Hole