Operating instructions

58D6002

Unvented Cast Iron Gas Stoves

 This appliance is equipped with an ignition device which automatically lights the pilot. If the

piezo is not working properly, refer to Match Lighting instructions on Page 21.

 BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next

to the floor because some gas is heavier than air and will settle on the floor.



• Turn off all gas to the appliance.

• Open windows.

• Do not attempt to light any appliance.

• Do not touch any electric switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier, call the fire department.

Use only your hand to push in, or turn the gas control knob. Never use tools. If the knob will

not push in or turn by hand, don't try to repair it. Call a qualified service technician. Force

or attempted repair may result in a fire or explosion.

 Do not use this appliance if any part of it has been under water. Immediately call a qualified

service technician to inspect the appliance and to replace any part of the control system

and any gas control that has been under water.

FOR YOUR SAFETY READ BEFORE LIGHTING

If you do not follow these instruction

exactly, a fire or explosion may result

causing property damage, personal injury

or loss of life.





PILOT

OFF

REMOTE CONTROL

ST1177

burner controls

Pilot

Optional Re-

mote Receiver

Hi/Lo Knob

Off/Pilot/On

Optional Fan

ST1177

Burner Controls - Piezo

Ignitor, Control Knobs and

Optional Controls

Piezo