Specifications

22
BFC36 Balanced Flue Heat-Circulating Fireplace
7412647
Chimney Components
Component Description Model Number
Chimney Support Used to support chimney for each of TCS8A
30’ vertical height and 6’ of angled chimney run (8” ue)
Firestop Required at each oor level and attic on FS2A (8” straight ue)
multi-story installation FS6A (8” 30° inclined ue)
Attic Insulation Shield Required in Canada FS2100HT
Traditional Top Housing Top housing of simulated brick pattern T20B
available in red, tan or white. Appropriate (single ue)
adapter is required (8CA). Flashing included. TL20B
(extra tall single ue)
Housing Extension Extends Traditional Top Housing on 202036
steep pitched roofs (single ue)
Contemporary Chase Top Used to terminate chimney at the top of a
Termination chase. Flashing is not included. TT200C
Adapter Kit (TT8CB) is required.
Chase Top Housing Used with chase terminations to prevent rain entry. FL88
(8” ue)
Contemporary Flashing 8-6-12 with 8” ue
Required for Contemporary Round Top 0 to 6/12 pitch
termination to prevent rain entry. 8-12-12 with 8” ue
(6/12 to 12/12 pitch)
Chimney Sections 8” ue
81 (1’ long)
Used to build chimney systems. 818 (1Z\x’ long)
83 (3’ long)
84 (4’ long)
Chimney Elbows Used to develop offset chimney systems.
Only 30° elbows are available. (Elbows 830A-2
packed 2 per carton - upper and lower (8” 30° ue)
elbow set.)
Round Top Termination Used to terminate chimney on the roof. RT8C
Flashing not included. (8” ue)
Extended Round Top Chase Used to terminate chimney at the top of a RT8CL
Termination chase. Adapter Kit included. Flashing not (8” ue)
included.
Adapter Kit Required to connect triple-wall chimney 8CA
with Traditional Top Housing (T20B or TL20B) (8” ue)
Adapter Kit Required to unite chimney with TT8CB
Contemporary Chase Top. (TT200C)