Technical data

© MHS Boilers Ltd
221106 Draft Copy E&OE
10
Pressure (Safety) Relief Valve
In accordance with BS 6644: 2005, the installer shall install as suitably sized Pressure
(Safety) Relief Valve.
The location of this valve is important with respect to the applied pressure of the boiler
circulation pump, it is therefore recommended to locate the Pressure (Safety) Relief
Valve on the flow pipe immediately adjacent to the boiler; furthermore, there must not
be any means of isolation between the boiler and the Pressure (Safety) Relief Valve.
Electrical Connections
Basic electrical connection for all type of Streamline FS
Additional terminals requiring Field Wiring for Cascade Manager Streamline FS units
Only
(These terminals are prewired on Standalone Streamline FS units.)