v1.00 - Specifications

mhpro.net 3 axis gyroscope sensor – Iota LPF v1.00 Version 1.0
Configurable outputs
Image 4
Image 5
Direction of increment
If you need to revert the signals, simply shortcut these little jumpers independently of each
axis (see image 4).
Output level
By default, the signals output level is 0 volt to supply voltage. If you need, the output can be
0 to 3.3 volts, even if supply is between 5 to 12 volts. You can configure it with the JP6
jumper (see image 5).
First cut the little trace between the two first pads (see image 6) and then solder the two
lower pads together (see image 7).
Image 6
Image 7